达诚环保

Product Features

The STPFA high-flow filter element adopts a 6" (152.4mm) large diameter structure and pleated form, with a high-strength polypropylene support skeleton inside. The liquid flows from the outside to the inside, and the external support is an integral polypropylene skeleton and a polyester filter. The special structure gives it a larger filtration area than ordinary pleated filter elements. Therefore, it has a larger filtration flow and a longer service life when filtering high-purity reagents. It is particularly suitable for filtering high-purity water.

Product Features

●The filter element uses hydrophilic membrane materials and can be used directly without pre-wetting, which greatly saves time and reduces costs

●The integral skeleton has the advantages of large filtration area, long life, high strength, and dimensional stability

●ST PFA high-flow filter element is suitable for applications with high flow and high dirt holding capacity

●High mechanical strength, will not deform under harsh process conditions

●Can be installed in existing housing without replacement or modification

Product parameters

●Filter material: polypropylene

●Support/flow guide layer: polypropylene

●Upper and lower end caps: polypropylene

●Filter accuracy: 1um, 5um, 10um, 20um, 50um, etc.

●Sealing material: silicone rubber, nitrile rubber

●Sealing method: hot melt welding

●Working temperature: <80℃, 0.28MPa

●Positive pressure difference: ≤0.42MPa (25℃)

●Replacement pressure difference: <0.28MPa (25℃)

Parker High Flow Filter Elements